How to Install
- Before installing the adhesive hook, please make sure the windowpane is clean, dry, and free from dust and oil.
- Measure 7” from the left side of the window frame and mark the windowpane.
- Tear off the back of the protective film on the hook while avoid touching the adhesive.
- Press the hook firmly on the windowpane at the 7” mark abutting the top of the window at the frame.
- Measure 7” from the right side of the window frame and mark the windowpane.
- Repeat step 3 and 4.
- If your curtain has more than 2 grommets, lay the curtain with the Face Toward Sun sticker facing down.
- Measure from the center of the left grommet to the center of the middle grommet and write the measurement down.
- From the right of the left 7” hook, take the measurement between the two grommets and mark the windowpane.
- Tear off the back of the protective film on the hook while avoid touching the adhesive.
- Press the hook firmly on the windowpane at the mark abutting the top of the window at the frame.
- It is recommended to allow 12 hours before hanging the curtain to ensure it is firmly fixed to the window.
- Mark a line of the selected shortest lengths of the window frame(see Measurement Tips) on the curtain and cut the excess off with scissors.
- Warp the silver aluminum tape along the bottom to seal the insulation.
- Hang SCREE Window Insulation Curtain on the hooks with the sun sticker on the curtain toward the sun.